Aaa Industries
Aaa Industries
ISO 9001:2008 Certified
Noor Baug, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

PTFE Anti Corrosion Coatings & Linings

We are proud to introduce ourselves since as one of the Manufacturer and Supplier of Xylan® / Halar® / PTFE (Poly Tetra Fluoro Ethylene) Coating and Linings on Industrial Components, Fasteners used in Offshore and Valve Industries, Textile Rollers machinery parts, Food / Bakery Moulds, Chemical / Pharmaceutical Industries Reactor Vessels, Valvesetc.

PTFE Non Stick Coating

PTFE Non Stick Coating
  • PTFE Non Stick Coating
Ask For Price
AAA industries undertakes PTFE non-stick, non-wetting, anti-static, self-lubricating, heat-resistant properties, thickness from 25 microns and above.

Very low adhesion to most materials, excellent water repellent, low-coefficient of friction, chemical inertness, and unusual thermal stability.

Temperature resistance -100°c to +260°c.

Not attacked by corrosive chemical or strong solvent.

Top 7 advantages & properties of PTFE coatings

1. Non-stick:

very few solid substances will permanently adhere to tefcottm coating and while tacky materials may show some adhesion, almost all substances release easily.

2. Non-wetting:

tefcottm surface are both oleo   phobic and hydrophobic, they are not readily wet, clean-up is easier, more through and in many cases self-cleaning.

3. Heat resistance:

there is no decomposition of tefcottm below 250oc, insignificant decomposition between 250o and 300° which requires no special precautions.

4. Low coefficient of friction:

the coefficient of friction of tefcottm © is generally in the range of 0. 05 to 0. 20, depending on the load sliding speed.

5. Cryogenic stability:

tefcot™ will withstand severe temperature extremes without loss of physical properties.

6. Unique electrical properties:

over a wide range of frequencies, tefcottm has high dielectric strength, a low dissipation factor, and very high surface receptivity.

7. Chemical resistance:

tefcottm is normally unaffected by chemical environments. The only chemicals known to affect all are the alkali metals and highly reactive fluorinating agents.
Request
Callback
Yes! I am Interested

Xylan Coating For Fasteners

Xylan Coating For Fasteners
  • Xylan Coating For Fasteners
Ask For Price
Fluoropolymer (PTFE) / Xylan Coated Fasteners, Studs, Nuts, Bolts, Washers best suited for installations in offshore platforms, petrochemical and chemical plants, installations near the sea and in corrosive environments.

We offer PTFE and Xylan coated fasteners which are high on demand list in the market that contain PTFE or other types of lubricants.

The coating of Xylan provides effective solution to the problems in engineering construction regarding wrong surface properties arises.

Moreover, the xylan is used as a coating material on alloy steel fasteners, aluminum and copper fasteners owing to various features including:
  • Nonstick
  • Low coefficient of friction
  • Heat resistance
  • Unique electrical properties
  • Polyurethane
  • Cryogenic stability

We offer a comprehensive range of High Tensile Fasteners ( B7/2H , B7M/2HM ) in order to meet various industrial requirements.

This range of products include:

  • Nuts
  • Bolts
  • Washers
  • Threaded bars and many more

These high tensile fasteners are widely used in various industrial applications.

These fasteners are available in various sizes, models, designs and finishes that sufficiently meet the client’s requirements:

  • Type: bolts, nuts, studs, washers, U bolts, J bolts, anchor rods, pins.
  • Size range: M 12 to M 150 .& 1/2" to 6" length upto 1000 mm
  • Specifications: IS (GR.8.8, 10.9, 12.9,) BS (GR. R,S,T), ASTM A193 (GR.B7 / B7M), ASTM A320      

 

Request
Callback
Yes! I am Interested

Rilsan Coating For Automobile & Medical Industries

Rilsan Coating For Automobile & Medical Industries
  • Rilsan Coating For Automobile & Medical Industries
Ask For Price
Item Code: Rilsan coating rilsan / polyamide 11 / Nylon/ PP/ PVC Coating for Defense, Electronic Industries

Modern new approach the plastic coating to combine metals and of plastic into a single functional part.

Various sizes, shapes and intricacy can be coated with plastic Powder like Polyethylene, PVC, CAB, Plastisol, Epoxy, Polyester, Nylon, PTFE, PP, PU etc.
Any article of intricate configuration can be processed. It ranges form 250 to 1000 microns. Wide color range.

Properties:


Metals can be insulated, decorated, self-lubricated and protected from chemicals. Temperature ranges from -1000C to +2600C. Withstands impact force and elongation upto 30%.

Typical Application:


Automobile parts, Medical Parts, Door Handle, Wheel of valves, grills etc.

Request
Callback
Yes! I am Interested

PTFE Food Grade Non Stick Coating On Moulds And Rollers

PTFE Food Grade Non Stick Coating On Moulds And Rollers
  • PTFE Food Grade Non Stick Coating On Moulds And Rollers
Ask For Price
Our PTFE Coated surfaces are both oleo phobic and hydrophobic, they are not readily wet, cleanup is easier, more through and in many cases self cleaning. Self-lubricating, Heat Resistant properties.


Temperature resistance upto 250 C and 300 C which requires no special precaution.


The coefficient of friction is generally in the ranger of 0.05 to 0.20, depending on the load sliding speed.
Request
Callback
Yes! I am Interested

PTFE/Halar/PVDF Coating And Linings

PTFE/Halar/PVDF Coating And Linings
  • PTFE/Halar/PVDF Coating And Linings
Ask For Price
Fluoropolymer /ECTFE (Halar)/PTFE/PVDF/FEP/PFA Thick Coating- Blion

 BLION- A pinhole free homogeneous thick coating of PVDF (KYNAR), FEP, PFA, ETFE, ECTFE (HALAR).

It has the extraordinary chemical resistance on chemical equipments parts. Any articles of intricacy shape can be processed.  We also provide Coating Service.

Thickness from 500 to 1000 microns. Any articles of intricate configurations can be processed.

Properties:
  • Temperature ranges from -100°C to +260°C.
  • Withstands impact force and elongation up to 30%.
  • Non-stick, Non-toxic, Electrical insulation, Anti-static and Release-surface.
  • Resistant to almost all chemicals and solvents.
Request
Callback
Yes! I am Interested

PTFE Moulded Products

PTFE Moulded Products
  • PTFE Moulded Products
Ask For Price
PTFE moulded semi-finished products like rods, cylinders, bush, blocks, sheets, tapes, etched cloth, tubes, pipes, magnetic stirrer and beakers. Available unfilled or filled like glass, graphite, bronze. Available as per the required size and dimension. PTFE Silicone Adhesive Tape available in extruded and skived films. Any width in length of 36 yards. Standard Thickness of 100 microns and also in other thickness TEFGLASTM - A combination of PTFE plus glass fiber without and with silicone adhesive. Width is 1000 mm and in continuous length. Glass cloth contribute excellent strength and dimensional stability, exhibit essentially zero flow under heat and pressure and are highly resistant to cut-through. Also in tape and belt form.

Properties:
There is no known solvents which can react with this materials. Temperature resistance from - 100°C to + 260°C and also resist up to 300oC for a short duration. Non-stick, non-wetting, self-lubricating, heat resistance and electrical insulation properties.

Typical Application:
Industries like Chemicals, Drugs, Pharmaceuticals, Electrical, Electronics, Communication, Fertilizers, Mechanical, Engineering, Pesticides, Petrochemicals, Nuclear Power, Oil, Exploration, Defence, Railways, Aerospace, Civil Construction, Food Processing etc.
Request
Callback
Yes! I am Interested

PTFE Lined Pipes & Fittings

PTFE Lined Pipes & Fittings
  • PTFE Lined Pipes & Fittings
Ask For Price
PTFE lined steel pipe size from 25 to 150 mm NB length of 3000 mm.

Used for both vacuum and pressure condition. Also supplied 900 and 450 elbows, tees, reducers, reducing flanges, blind flanges, spacers dip pipes, spargers and thermocouple.

Properties:


Resistance to virtually all chemicals and oxidizing acids high thermal stability. Suitable for continuous temperature from -30°C to + 200°C. Non- stick, low co/efficient of friction, excellent insulating properties, Low weather ability and thus non- aging.

Typical Application:


Industries like Chemicals, Drugs and Pharmaceuticals, Electrical, Electronics and Communication, Fertilizers, Pesticides, Petrochemicals, Nuclear power, Oil Exploration, food Processing, Defense, Aerospace etc.
Request
Callback
Yes! I am Interested

PTFE Coated Studs, Nuts & Bolts

PTFE Coated Studs, Nuts & Bolts
  • PTFE Coated Studs, Nuts & Bolts
Ask For Price
Fluoro polymer (PTFE)/ xylan coated Fasteners, Studs, Nuts, Bolts, Washers best suited for installations in offshore platforms, petrochemical and chemical plants, installations near the sea and in corrosive environments. 

We offer PTFE and xylan coated fasteners which are high on demand list in the market that contain PTFE or other types of lubricants. 
Request
Callback
Yes! I am Interested
X
Looking for “PTFE Anti Corrosion Coatings & Linings”?


Reach Us
AB Khan (Proprietor)
No. 104, Marwah Safa Marwah Tower Opposite Noor Baug Hall, RB Marg
Mumbai- 400009, Maharashtra, India


Call Us

Send E-mail

Send SMS